single (oem )

#063 Hikari Limiter

Order idPriceWeightStatusStock
#063 19000Yen--gram release3

Parameters:

  1. Limit Meter : It’s shows the depth of limiting. (Panel shows it as ‘UV’, however it’s not ‘UV’)。
  2. Limit knob (threshold) : This knob set the threshold level that starts compress. Tuen it right makes low the threshold level.So do it makes more hard compression.
    (warning : when input level is so low, then this knob cut the output.)。
  3. OUT VOL : Setting output level after effect of this item.。
  4. INPUT VOL : Setting input level before effect.。
  5. OUT (Jack) : Effected signal outputs.。
  6. INPUT (Jack) : signal input you want to add effect.。
  7. Meter Trim : You can set the meter action. turn right makse it more aggressive.
  8. RATIO Trim : this trim sets the compression retio over the threshold level. turn it right it getting to be more strong compression.
    (warning : too much strong compression get no sounds.)。

Example to use :

  • Set ‘LIMIT’ knob 0 (no limit).
  • Set ‘INPUT VOL’ max. Set ‘OUTPUT VOL’ as you like. Meter may move.
  • Down ‘INPUT VOL’ until not to move Meter.
  • Up ‘LIMIT’ knob as you like. when you feel total level gets down, turn up ‘OUTPUT VOL’

Hikari Limiter
8HP
70mA:+12V
20mA:-12V
35mm Depth
hikari-logo
Link to HIKARI INSTRUMENTS


Shipping / Handring fee
Weight NorthAmerica /
Australia
Europe
under 500g 2000 yen 2200 yen
under 600g 2180 yen 2400 yen
under 1kg 2900 yen 3200 yen